|
Product Details:
Payment & Shipping Terms:
|
Weight: | About270g(Include Battery) | Max Display: | 3999 Or 9999 |
---|---|---|---|
Power: | 9V | Max Expand Of The Pincers: | 30mm |
Vhz: | <100kHz | Product Model: | DC/AC Clamp Meter Bm5263 Digital Multimeter |
Highlight: | Bm5263 Digital Clamp Meter Multimeter,40A Digital Clamp Meter Multimeter,400A mini digital clamp meter |
DC/AC Clamp Meter Bm5263 Digital Multimeter
Introduction
Welcome to use this product.
BM5263 adopts high-performance MCU processor,it is Great Value as has high
reliability,security, automatically setting range funcition,hand-held clamp
meter etc.. the product has a large digital display, full range overload
protection, data-hold function, undervoltage indication, auto shut off function,it
has TRUE RMS measurement function which can accurately
measure frequency voltage, non-sinusoidal voltage and inrush current measurement
function which can measure inrush current about 80mS RMS, the instrument is
suitable for frequency-converting power supply, motor performance test, The
function to measure DC current range up to DC 40A/400A/6000A , which is widely
used in electroplating, DC welding machine, motor vehical test and all kinds
of DC 500mA current measurement. It is more excellent for a new generation of
practical electrical measuring instrument .
This product is ideal instrument for test, maintenance and repais in college,
smelting, communications, manufacturing, petroleum, electric power, national
defense,electronic, electric power equipment .
Safety standard
The meter in structure complies with the safety requirements of ICE61010-1. Read
the instruction carefully as follows before you use the meter:
1. When measuring voltage, AC or DC voltage should not be more than the peak
voltage (DC / AC 600V) of the meter.
2. Voltage of less than 36V is safety voltage. When the voltage is more than DC 51V
or AC36V, the leads should be checked. The test lead should be connected correctly
and their insulating property should be under excellent status against electric shock.
3. When change of functional measuring range, the test lead should be away from test
point.
4.It is suggested that for safety the functions and range should be selected correctly
although protective function for the full measuring range exists.
5.When measurement of current, the input current shouldn't be more than the
maximum current labeled on input end.
6. Safety symbols:
FAQ
Contact Person: Mr. Rocky
Tel: 86-18789401166